C SERIES CNC LATHE
|
|
C SERIES CNC LATHE |
|
|
|||
|
＊
Super heavy duty
|
|
MACHINE SPECIFICATIONS |
M/C
MODEL UNIT |
C-11•★ (-G) •☆ | C-13•★ (-G)•☆ | C-15•★ (-G)•☆ | |
|
MACHINING CAPACITY |
Max. Swing over Gap(-G) |
ψmm | 1300 | 1500 | 1700 |
|
Max. Swing over Bed |
ψmm | 1120 | 1320 | 1520 | |
|
Max. Swing over Carriage |
ψmm | 770 | 970 | 1170 | |
|
Width of Gap (-G) |
mm | 405 | 405 | 405 | |
| Center Distance | 100 mm | ★ | ★ | ★ | |
| SPINDLE |
Spindle speed (4 speeds) |
rpm | 1 ∼ 500 | 1 ∼ 500 | 1 ∼ 500 |
|
Hole Through Spindle |
ψmm | 153/230*/310* | 153/230*/310* | 153/230*/310* | |
|
Spindle bearing bore |
ψmm | 190/280*/360* | 190/280*/360* | 190/280*/360* | |
|
Spindle nose |
A2-11/A2-15*/A2-20* | A2-11/A2-15*/A2-20* | A2-11/A2-15*/A2-20* | ||
| TURRET |
Turret type☆(S:square, H:hexagon) |
S8/H6* | S8/H6* | S8/H6* | |
|
Tool shank size |
mm | □50, φ100 | □50, φ100 | □50, φ100 | |
| X/Z AXIS |
X-axis travel |
mm | 685 | 750 | 775 |
|
Z-axis travel |
x100 mm | ★ | ★ | ★ | |
|
X-axis rapid traverse |
M/min | 10 | 10 | 10 | |
|
Z-axis rapid traverse |
M/min | 6 ∼ 8 | 6 ∼ 8 | 6 ∼ 8 | |
|
Way width (Z-axis) |
mm | 1130 | 1130 | 1130 | |
| TAILSTOCK |
Quill Diameter |
ψmm | 115/240* | 115/240* | 115/240* |
|
Stroke |
mm | 250/300* | 250/300* | 250/300* | |
|
Live Center Bearing (front) diameter |
ψmm | — /170* | — /170* | — /170* | |
|
Center Taper |
MT | MT 6 | MT 6 | MT 6 | |
|
Power Moving |
√ |
√ |
√ |
||
| MOTOR |
Spindle motor |
kw | 22/26 | 22/26 | 22/26 |
|
X-axis servo motor |
kw | 3.0 | 3.0 | 3.0 | |
|
Z-axis servo motor |
kw | 4.5 | 4.5 | 4.5 | |
|
Hydraulic pump motor |
kw | 1.5 | 1.5 | 1.5 | |
|
Coolant pump motor |
kw | 1.5 | 1.5 | 1.5 | |
| MACHINE OUTLINE |
Width (W) × Length (L) |
mm | 2590×(5240+100×★) | 2590×(5240+100×★) | 2590×(5240+100×★) |
|
Machine height |
mm | 2630 | 2630 | 2630 | |
|
Net weight |
ton | 12 ∼ 17 | 13 ∼ 18 | 14 ∼ 19 | |
|
STANDARD ACCESSORIES |
|||||
|
Tool holder |
4pcs | 4pcs | 4pcs | ||
|
Boring bar bush (φ 25,32,40,50 mm) |
4pcs | 4pcs | 4pcs | ||
|
Drilling sleeve MT 3 and MT 4 |
2pcs | 2pcs | 2pcs | ||
|
Chip conveyor |
√ |
√ |
√ |
||
|
Working lamp |
√ |
√ |
√ |
||
|
Heat exchanger for electrical cabinet |
√ |
√ |
√ |
||
| Oil Cooling system for Headstock | √ |
√ |
√ |
||
|
Auto lubrication equipment |
√ |
√ |
√ |
||
|
Complete tool kit |
√ |
√ |
√ |
||
|
Mitsubishi 520AL Controller |
√ |
√ |
√ |
||
|
OPTIONAL ACCESSORIES |
|||||
|
Hydraulic Chuck with High-Low pressure selection |
Automization device |
||||
|
Manual Chuck or Face Plate |
Fanuc Controller 18-T |
||||
|
Air condition for electrical cabinet |
Chip trolley |
||||
|
Extra (Special) Tool holders |
Coolant filter |
||||
|
Other turret |
Custom machine color |
||||
|
Power Doors |
CE Mark |
||||
| Built in Rotary Center Tailstock | |||||
(★ : 15, 20, 25, 30, 35, 40-Center distance codes) (*: optional accessory)
